How many of you guys would like to make a slab slayer really easy real simple using a nail and dipping it into hot plastic pull the tube off the nail . take a razor blade and cut the tail at a angle.
Attachment 176983
Printable View
How many of you guys would like to make a slab slayer really easy real simple using a nail and dipping it into hot plastic pull the tube off the nail . take a razor blade and cut the tail at a angle.
Attachment 176983
Now there's a dandy. Nice work Bob.
I would! Bob could you do a step by step type of nail? Etc?
I have done it using a small wind chime that I sprayed with Pam and wiped off then dipped into hot plastic in the Pyrex cup. When cooled it slides off the metal tube easier. Use a razor to cut the angle. Stuff it with crappie nibbles and go fishing.
Attachment 177038
we are using spike nails I don't know what size
Attachment 177040
here is a Pyrex cup that we are Dipping the spike into
Attachment 177041
we have pulled tube and cut it at an angle with a razor blade.
Attachment 177042
you could also make a full skirt I keep cutting to make the tail you can use smaller nails to make smaller skirts or smaller slab slayer if you're wanting 2 colors dip the head in a second color.
Sweet!
A 20 penny nail is a big nail and should get this done with no problem. A 16 penny is too small of diameter.