Printable View
I have an HDS 10 Gen 1 that will not have a clear picture if I am traveling over about 6 MPH this is what the screen looks like . This just started about 3 fishing trips ago. I have reset the Sonar to default but this didn't clear it up. Any Ideas?
Attachment 176337
Attachment 176338
Can you post of pic of your xducers ...??
Rickie
In shallow of water, I would try your sensitivity setting at - numbers. You can go to -3 or -4 to help clean up the clutter.
What are your noise reduction settings ?
Is your surface clarity filter on ?
Here is a video produced by Jason Gilstrap one of the Lowrance Pro Staffers. I hope this helps !
Brian
Tips on Lowrance HDS 2d sonar and Structure Scan settings - YouTube
Attachment 176401Attachment 176402Attachment 176403
Rickie here are pictures of my transducer. I will try to get some better ones tomorrow when it is light outside. Thanks Brian for the link it was very helpful..
Your xducers look like they're in a good enough spot for clean bubble free water ...
Can you test someone else's head unit on your boat...??
Or test your head unit on someone else's boat ...??
This should verify if it's your head unit or your xducer(s)...
Rickie
If your settings are good you can try a soft reset.