I have a indash Zercom flasher wiyh a transom mounted transducer, I got a hummingbird combo with down image. I would like to mount the transducer for unit beside the one for the flasher. My question is will this be ok?
Printable View
I have a indash Zercom flasher wiyh a transom mounted transducer, I got a hummingbird combo with down image. I would like to mount the transducer for unit beside the one for the flasher. My question is will this be ok?
The HB transmits the 200kHz frequency all the time...(unless the sonar is shut off and the unit is used as a chartplotter only)...
The HB can be set to transmit also the 83kHz...the 455kHz...and the 800kHz frequencies...
If the Zercom is (or can be) set to a different frequency...there should be no crosstalk interference...
Rickie
Thanks rnvinc, I don't plan on using them both at the same time. It would be easier for me and less hole drlling to mount them side by side.
I don't foresee any problems with your setup running them separately...
We're here if you run into issues...
(And post up pix...we like pix)...
Rickie