Does the Terrova "click" when the go button is pushed? I kinda remember hearing a relay click with the V2. Just wondering if the Terrova clicks. I can't hear crap anymore.
Printable View
Does the Terrova "click" when the go button is pushed? I kinda remember hearing a relay click with the V2. Just wondering if the Terrova clicks. I can't hear crap anymore.
Don't think so
I haven't noticed it.
If you have the IP, then look at the remote display screen, it will show the prop spinning, prop speed, mpg, etc., when its in gear.
Never heard mine click.
I got a power drive. every time you push a button it beeps. May not be loud enough for geezer ears ha. ha.
dont know but that round thing next to the remote learn button is a speaker.on a powerdrive hold the + and - buttons at the same time and u will hear it beep do it again and it will beep twice,not sure on the terrova
The "click" in the V2 is a horn relay that applies the voltage (12/24) to one of the brushes when the motor on button is pressed. After the slight delay (20 milliseconds) the other brush is pulsed to ground at the pwm rate set by the foot pedal slide setting.
My hearing is in advanced stages of deterioration.
I was wondering if the Terrova worked in a similar manner as the V2 (relay, followed by pulses).