Printable View
First pic is slab busters I just made.Attachment 124444second pic is where I cut a piece off old bait and put pin in end of 1/4 inch rod
Attachment 124445Third pic insert piece of grub on rodAttachment 124449fourth pic stick rod in cup of plastic to desired length of head then lean cup and put rod on angle where plastic will go half way around rod to make tailAttachment 124451finished product , the head can be dipped again for different colorAttachment 124452
you did a fantastic job of displaying how to make slab busters this is what I'm talking about creativity on here I hope to see more of this in the future no matter what it looks like guys get it on here so we can take a look at were always interested in new tricks on how to make plastic baits and this is definitely one here.
I notice that he is using a regular coffee cup instead of a pyrex cup and also what appears to be the end of a fishing rod instead of a metal rod to dip into the soft plastic. Are there any safety concerns here? Does he still coat the dipping rod with Pam first? Very nice visual instructions. It is nice the way people share hints and information on crappie.com.
Thanks for the tips, I'll give them a try.
You have some valid points there Ship.Quote:
Originally Posted by shipahoy41
Ship it is a microwaveable cup,and it was a fishing rod,but I have use round wood stock and sand slick,Pam help but will work if slick,can even paint it, with a heat paint, all is done outside of micro so I never had a problem but I do wear a glove when actual working with it ,and glasses also.
a few comments on how I make the slab slayer might use nails I've enclosed some pictures for you guys to look at I definitely would be used in Pyrex cups instead of a regular coffee cup though it may be safe for microwave I still trust the Pyrex more you could make these little guys many different ways I do have a mold to make them but I do not like the mold is faster making him with the nail than it is to use a mold you can go ahead and make a plug and put that on the end of the nail if you want I do not I usually double dip the plastic bait after I get through: name off the nail what happens when you summer just into hot plastic issue will fill it that had up full of plastic and if you're wanting to make a 2 color you can put it back in.
Attachment 124609Attachment 124610Attachment 124611
you forgot to mention you may want to spray a little Pam on the nails do not go overboard it will help when you pull them off.
Great tips and photos on this thread. I will have to go find some 12" nails at the hardware store either that or perhaps Bob will make me four of them and ship them to me with his bill. What do you think Bob?
no problem we gladly send you some I forgot to tell you if you dip the nail all the way you can make some tubes also you can pull it off the nail and cut it at angle to get a slab buster I thought you might like that:biggrinQuote:
Originally Posted by shipahoy41
I went into the shop and found some old wind chimes. This is what I came up with.Quote:
Originally Posted by snake River
Attachment 124633
Attachment 124634