Printable View
Time to retire my motorguide and buy a minn kota. I spider and pull cranks. Simple boat, 16x54 allweld with deep sides. What model to buy, where, shaft length, 12v vs 24v? Definitely leaning towards the terrova/ipilot. Also, is there an accessory for a quick disconnect for these? Duck hunt and will need to remove it. Appreciate your advice very much! Thank you!
24volt 80 terrova 54in shaft and you should be set
Minn Kota also has a quick release mount that makes removal easy.
What Big H said and there is a quick disconnect made for it. I have one on mine and it's very quick and easy.
My opinion is make your setup is where you can change trolling motors.Besides the cost the main reason I have not gotten terrova is because you are limited. If all you fish is open water then the terrova is perfect,but if you like single piling you will want a hand control.jmo
Sent from my iPhone using Tapatalk
Got terrova last yr & put it on my excell , with the float pods on back the bracket is necessary. When I unload off the trailer the prop hits the front roller/bumper and will break off. Great pin through design for locking too. Pulled the head off and ran the transducer through this morn ; not hard to do and also necessary because the terrova trans does not work well with most finders! While I was already in there I cut the shaft off another 6 inches and now am a 48 in rig. It was just high enough to hit the rodhders . 24 volt 80# I can fish 3 days hard still have 1/2 batt. Toggelers brand toggle bolts. At lowes Riv- nuts suk