Bamboo Pvc Tree

Well we are going to finally drop some of our bamboo pvc trees this next Sunday....We already have 20 made up...Just need to cut the holes in the pvc....I think we plan to cut out 6 holes and use 2 bamboo shafts per hole...One boo shaft going from each side...So, that we will have leaves on each side....

We plan to drop 2 bamboo pvc trees per spot....Should create a pretty good size area.....

Probably use 14 to 16ft long pieces of bamboo....

This will be our first dropping these...I think these bamboo pvc trees will hold fish really well..

Jeremy

We ran into the snag on boo pvc trees...So, we are going to use 1 3/4 width oak at 8 to 10ft long instead of the boo....We also, plan to use scrap vinyl siding....We will cut the vinyl down to squares and screw onto the wood....This will make it wider and create more shade...We will probably just drop two of these at the drop this coming Sunday..

I will post pictures once we built..

Jeremy

Lets see some Picts

Keep building and it will pay off!

We didn't end up dropping the wood pvc trees...We decided to wait until this fall/spring to drop boo pvc trees.....We did drop 2ft stakes and wood stake pallets...

Jeremy

Quote:

---

Originally Posted by jcd

We ran into the snag on boo pvc trees...So, we are going to use 1 3/4 width oak at 8 to 10ft long instead of the boo....We also, plan to use scrap vinyl siding....We will cut the vinyl down to squares and screw onto the wood....This will make it wider and create more shade...We will probably just drop two of these at the drop this coming Sunday..

I will post pictures once we built..

Jeremy

---

Great idea! lets see the pics if you got em' The vinyl has unlimited uses for habitat, get creative like JCD!!