LCX27C with a E-net Connector / LSS-1

Question:
I have a LSS-1 Hooked to my Gen-2 HDS7 using “E-net”
I have a LCX27C with a E-net Connector.
Can I connect my LCX27C to my LSS-1 using E-net.
If I can, what can I share between units-- waypoint?
What about the sonar / structure scan?
Thanks
Rick

Quote:

---

Originally Posted by HaleDamage

Question:
I have a LSS-1 Hooked to my Gen-2 HDS7 using “E-net”
I have a LCX27C with a E-net Connector.
Can I connect my LCX27C to my LSS-1 using E-net.
If I can, what can I share between units-- waypoint?
What about the sonar / structure scan?
Thanks
Rick

---

Waypoints and 2d. Max waypoints is 1000 on lcx27. I have the same setup.

Quote:

---

Originally Posted by Cane Pole

Waypoints and 2d. Max waypoints is 1000 on lcx27. I have the same setup.

---

Will the waypoints & 2d work if I connected my LMS 522 to my Gen 2 hds 10 with lss-1?

Quote:

---

Originally Posted by sah

Will the waypoints & 2d work if I connected my LMS 522 to my Gen 2 hds 10 with lss-1?

---

Should.

Make sure your units have their latest updates. Also, I believe the units have to be 2007 or later units to work properly. Call Lowrance to verify.

One of the Lowrance guys said.....LCX27C cannot display StructureScan. Adding E-net will let you share 2D sonar. To share way points, you have to add nmea network.

More cables???...Maybe just wait till next year and get a Gen2 HDS 7 for the Bow.

Thanks Guys

Rick

The LSS-1 or LSS-2 HD only work with HDS units. It will let your share 2d sonar, but I wouldn't worry about that going from lcx between HDS. You cannot share wpts off the ethernet cord between LCX.. you must have nmea 2000 to do that with your hds unit.