Anyone Making 3/32 Pony Head

I have a friend interested in 3/32 Pony Head jig and was wandering if anyone sells or has made or modified a mold for baby shad baits with wire keeper?

I like the 3/32 oz jig size and fish the ponyheads religously, I would definetly pay someone for 100 3/32 ponys with wire keepers if there is such an animal

Since the Pony Head makers/sellers have been getting cracked down on I doubt you will find that unless someone is willing to take the risk. You should be able to get some regular jigs with swivels in them or use a Lindy type spinner on a regular head. I am not sure, but think maybe RonDon makes some jig heads with a swivel in the head so you may want to check with him, but again I do not know if he does 3/32 either.

Quote:

---

Originally Posted by skiptomylu

Since the Pony Head makers/sellers have been getting cracked down on I doubt you will find that unless someone is willing to take the risk. You should be able to get some regular jigs with swivels in them or use a Lindy type spinner on a regular head. I am not sure, but think maybe RonDon makes some jig heads with a swivel in the head so you may want to check with him, but again I do not know if he does 3/32 either.

---

Why are they getting "cracked down on"???

Blake

First of all for making them yourself if you look at the Do It catalouge they don't even have a 3/32oz in any of the molds.

In answer to your ?? "Why are they getting "cracked down on"???

Because it is ILLEGAL for home casters to sell them!!!! Read the sticky with answers from Blakemore

http://www.crappie.com/crappie/jig-t...rse-heads.html

You can trade them (And not for green paper), but not sell them!

Quote:

---

Originally Posted by Fatman

First of all for making them yourself if you look at the Do It catalouge they don't even have a 3/32oz in any of the molds.

In answer to your ?? "Why are they getting "cracked down on"???

Because it is ILLEGAL for home casters to sell them!!!! Read the sticky with answers from Blakemore

http://www.crappie.com/crappie/jig-t...rse-heads.html

You can trade them (And not for green paper), but not sell them!

---

Thanks Fatman! I would have thought the sticky post would have at least slowed down these questions since that thread answered everything.

Blakemore owns the Trademark on that design so they are the only ones that can sell a pony/Roadrunner type jig head. Trademark unlike a patent will never run out either.

Quote:

---

Originally Posted by BlackWidowJigs

I was also looking at longa go post on here and jungle jim makes some spinner head jigs also. If this help

---

I know someone does, just can't remember who all does that.

Thanks for posting this for them!

I know the roadrunners from do it molds are heavier then stated size. The 1/16 actually weighs about 3/32. A mold stating a 3/32 roadrunner probably doesn't exist. Very few baits out there with a 3/32 head. I have one,a walleye head with a recessed eye. You can tie a crane swivel in by the head and make a hand tied bait or put a crane swivel,split ring and blade together and slide it on before rigging your soft plastic. You can do that with any kind of jig head.