help with 997 and 957

got a couple questions for you side imaging guru's out there. i tryd out my 997 and957 for the 1st time today. and i have a couple issues. first thing i noticed was my 997 (transom mount) the side imaging looked streaky. the water column was kinda hazy and the bottom lookd fuzzy. i could still see things. but barely. anybody got any ideas? next. my 957 up front works good most of the time. but occasionally flickers different depths. up to 22 feet deep when we wer clearly in 10 foot of water. and then it would just stop for a while. and then start doin it again. and last i hav my interlink mounted up front by the puck and my 957 and hav the gps plugged in to my interlink. along with both units. but my gps wont work. no birds eye view, no marking waypoints. when i push mark. it says no gps available. what do i do?

I am no guru by a long shot but have a couple of ideas. First on the depth issue I would check the software version to make sure it's up to date. HB has done some software updates recently to address the shallow water issue. If it is up to date then try switching the setting from freshwater to saltwater. With the GPS issue I would try hooking the puck directly into the unit just to prove that it does work. If it then works you at least know that the unit and puck are good and the problem lies somewhere in the interlink system. Then check your menu settings to make sure you have told it to see the puck. I know with ethernet the unit needs to be told which puck it should use, not sure if interlink is that way also. I'm going to let someone with more knowledge than me try to help you with your SI problem.

Kenny has good advice about most of your other questions....

About the SI image....Can you post a screenshot of the SI in action...

If the fuzziness in the SI image is constant..it is probably a setting issue...transducer issue..software issue...
If the fuzziness in occasionally..it could be bubbles ..from turbulent water, prop wash..etc..bubbles make the SI image fuzzy or hazy..but generally clears up after the boat gets into other water that has no bubbles...

A screen shot of what you are seeing would be very beneficial...

Rickie

The fuzziness is constant. I don't Have a way to get images on here yet. As far as the GPS goes. I tried hooking it up directly to the 957. But I have another Puck. So I will try it out tomorrow along with updating the software.

Try these settings...

SI sonar beam... 800kHz
SI Range...60-70ft
SI Chart Speed...match boat speed

Open "SI Enhance" from Xpress menu (1 "Menu" click)
Adjust these settings in SI Enhance...
SI Sensitivity... Up or down to adjust "brightness" of SI image
SI Contrast...10
SI Sharpness...Off

If you need help posting a SI screenshot... Just ask..

Rickie

Kenny is right: check the software version in both units and make sure that it is up-to-date before going any further.

It would be best if you connect a GPS Receiver to each unit. Rickie this and let us know if it helps or not.

Rickie is right: we need a screen snapshot of what you are seeing to help diagnose the problem.

ok. i will c what i can do. im getting ready to try to upload the sofftware. and wont b able to get on the water til tomorrow. i will try n get pics then. when im sitting in my garage the screen looks flawless. but in the water it looks fuzzy. and really only the side imaging. the down imaging looks ok i think.

Here is info on the proper way to update your unit..
How do I download Software to my HB Unit using MMC/SD card?

Do you need help in getting screenshots onto a SD card...??
Do you need help in getting screenshots onto your pc...??
Do you need help in getting screenshots from your pc into the forum..??

You can always pm me if needed... I'm glad to help anyway I can...

Rickie

i appreciate all the help guys. i will try to get some screen shots tomorrow. i think i know how now. what i do need help with now is. i got the units updated. and set the 957 to external gps. and it workd. theni hookd it up to the interlink. and the interlink pop up came up. and said connected. then i went to my 997 and hookd up the interlink and it worked. then went back up to the 957 and the gps quit working. and cant find that external gps option anywhere. any ideas?

I don't have the "Interlink"... So I can't help you with that one...

Email Greg.... [email protected]