faster method of powder painting?

What method can be used to produce powder painted jig heads quicker? I am currently using an alcohol lamp, producing one painted head at a time . The results are fine but just time consuming.I usually try to crank out 200-300 painted heads at one sitting -takes about half day.A faster way would really be sweet!

You are doing what I do and don't know of a better way with powder and still have even paint coat and eyes clear. Plus they would all have to be the same color and I hardly ever paint only one color. This is not a fast speed hobby actually, for sure not to me.

Skip

Have them pre-heated, then quickly dip/spray a dozen or so at a time. Then place back in to oven to finish cooking while grabbing the next dozen to paint.

They make a gun for powder paint and if your really want to go fast electrostatic spray systems. They also make a tray system, it does quite a few at once, maybe 100, but it also takes 3#'s of paint to charge the system. Check out each mfg's site, they all have different stuff.

I make and sell fluid beds but i also use them,for a heat source i use a heat gun and with a little practice you'll have a nice thin coat without a bit of paint in the eyes and as a bonus they speed up the process i can paint 100 in about a half hour.Powder Coating Fluid Bed w/BONUS Powder Paint and Jigs | eBay i also sell the fluid bed cups so you can use different colors.3" Deep Fluid Bed Cup 2" Dia. Powder Coating Fluid Bed | eBay

Heat Gun or Torch ... they work the best for large numbers ... Alcohol lamps or using the oven are great for smaller numbers .. Fluid Bed is a must for larger numbers ... a good rack to rack them on and use to cure in the oven ... Run it over the heat source ... a quick "Swish" in the fluid bed .. a quick "Tap" to clear any loose powder ... then hang on the "Rack" .. when you get rack full Bake in the oven .. have at least 2 racks to speed it all up. Course this is all personal choice and what works best for each person.
2 cents worth (factor in rate of inflation would come to about 5.00)