Maachuu and ScottV

Do ya'll sand to paint off a crank before you repaint it? Also what clear sealer do you use?

I scuff them up with a pad I got from Walmart to help the paint stick. As for sealer, I have used Envirotec and currently am using Devcon 2ton which dries faster than the Envirotec

m

Thanks

could you use an automotive clear coat over the paint? I have been wanting to add some scales to some of my cranks and was just wondering.

Quote:

---

Originally Posted by torch

could you use an automotive clear coat over the paint? I have been wanting to add some scales to some of my cranks and was just wondering.

---

I would think you could if you didnt have any reactions with paints and other sealers that are already on the baits. I have not tried any myself. torch, over in the craft dept at Walmart they have a glue that has glitter already in it, might try that and then paint over that with some clear finger nail polish.

I was thinking of using hardware cloth or some small screen to get the scale effect on the cranks.

Quote:

---

Originally Posted by torch

I was thinking of using hardware cloth or some small screen to get the scale effect on the cranks.

---

I have found the el cheapo dip net (99 cents) from Walmart does a good scale pattern

Quote:

---

Originally Posted by maachuu

I have found the el cheapo dip net (99 cents) from Walmart does a good scale pattern

---

Thanks

Quote:

---

Originally Posted by torch

Thanks

---

I guess I should have clarified myself, that would be the minnow dip net :)

X2 on everything maachuu said. Here lately, I haven't been sanding the baits. I'll just put on two coats of Opaque White, letting it dry good between coats. I use the Envirotex two part epoxy coating and hang them by the bills to drip. It's the clear finish used on bar and table tops.
http://i804.photobucket.com/albums/y...1/972df8a0.jpg