Attachment 61183
Printable View
yes will cut tail later
You really want to keep the natural ends with the jig. Here is are a couple of quick steps to get you going in the right direction. Pics aren't the best but I was holding the piece of tile behind the vice for background.
1st: Pull the feathers off. Stack so the tips are roughly the same length. Hold feathers in the hand that you will hold the sissors in to gauge the correct length (shown in pic). Switch which hand that is holding the feathers. Hold near from the side you will use on the jig close to the point where you are going to cut.
Attachment 61195
Cut feathers to length.
Attachment 61193
Attach to hook with 2 or 3 wraps. Adjust dispersion of feathers around hook shank.
Attachment 61194
Finish with a clean wrap.
Attachment 61192
blaze orange head/fl. chartreuse thread/white tail
I may call off my day job to fish that tomorrow!
Hope this helps.
PA Slabs Nice picture tutorial on how to tie a thread body. Wish I knew how to Post pictures on the board not that I haven't tried just that I haven't found out how yet. Next goal to learn how to post pictures on CDC.
Yellowjacket Now try to duplicate what PA Slabs has just shown you. Do a Red Head, Blue Body, and White tail. Then post a picture of it. Try to make it just like PA Slabs. Don't give up keep working you will get there.
Redman
Yes never tie it and cut the tail later as you have to cut the other end!
Skip
nice tutorial PaSlabs... YellowJacket do you have a tying vice?... What kind of thread are you using? Looks a little thick. Keep it up you'll get it.