saw it over on the Lectronics board so I want and got it. See what all it does. Just remember that you have to restore factory defaults when you install a new version
Printable View
saw it over on the Lectronics board so I want and got it. See what all it does. Just remember that you have to restore factory defaults when you install a new version
Well? What does it do ya gewb?
320 includes:
The new Contour Mode has been added. This Mode is part of the SI Enhance Menu in the Express Sonar Menu.
/uploadedImages/Humminbird/Content/Support/FAQ/ContourOffMenu.jpg
Contour Off shows you the standard Side Imaging view
/uploadedImages/Humminbird/Content/Support/FAQ/ContourModeOff.jpg
Contour On removes the water column and shows you a flat representation of the bottom.
/uploadedImages/Humminbird/Content/Support/FAQ/ContourModeOn.jpg
Here is a brief video on this topic.
Addition of Side Imaging range lines
/uploadedImages/Humminbird/Content/Support/FAQ/SIRangeLines.jpg
Side Imaging Navigation - When you are Navigating (GOTO) to a waypoint the boat icon on the top of the side imaging screen will try to show you the direction to the waypoint. This icon will move around to provide the direction to the waypoint.
/uploadedImages/Humminbird/Content/Support/FAQ/SINavigation.jpg
Addition of Down Imaging™ Zoom
/uploadedImages/Humminbird/Content/Support/FAQ/DIZoom.jpg
plus a fix relating to DownImaging bottom lock, DownImaging shallow water depth detection, DownImaging sonar recording/playback at shallow depths
If you have a:
# 1197C SI
# 997C SI
# 957C
5.320 includes:
Resolution to Interlink issues affecting GPS connectivity and waypoint sharing, along with changes to: importing from an MMC card, setup menu options, exit during remote sync in progress, GPS Course and auxillary temp alarm. Both units connected through the Interlink must have 5.210 software or higher loaded onto their units for these changes to work.
Chart layers were added, custom chart menu display was fixed along with minor Downrigger fixes were made for those with Cannonlink.
If you have a:
# 1197C SI
The Auxillary Temperature information box was added.
Dang!!!!! Ole DD can copy/paste like a pro!!! :)
Dang Skippy CN
I believe I read where the new update will mess up an Interlink connection. So if you got interlink, you might want to wait a little while till they get that bug fixed. I don't have interlink so I will probably install it this week.
DoubleG
The 5.210 did mess up my interlink Zack, hope the fix comes out soon.
Does it not just say that the 5.320 is the resolution for the interlink?
If you have a:
# 1197C SI
# 997C SI
# 957C
5.320 includes:
Resolution to Interlink issues affecting GPS connectivity and waypoint sharing, along with changes to: importing from an MMC card, setup menu options, exit during remote sync in progress, GPS Course and auxillary temp alarm. Both units connected through the Interlink must have 5.210 software or higher loaded onto their units for these changes to work.
Yes it does say that.
I believe that is the fix but still not out yet. I have the 998 which is not listed above.Quote:
Originally Posted by Minnerman