Shopping list for Bass pro

man, I hate this. I'm trying to get my last minute shopping at Bass Pro done today and I've thought about needing several things but forgot to write them down. AAAAH
So far it's

2 more Driftmaster Rod Holders (gives me 6 total)
Extendable dipnet since I broke mine 2 weeks ago
Few more SMALL road runners
Rear running light
I have plenty of hooks, jig heads and bodies, corks, nibbles, rods and reels
I KNOW there was something else I needed to pick up but I'll be darned if I can remember what it was

Was it..................................a clue?

Wannabe...

New 2010 Navonics platinum maps card
2 x 60" drift socks
2 offset seat pedestals
1 trolling motor SI transducer mount

It'll hit me about the time I get back to the office. LOL I already picked up a gallon of 2 cycle oil so that ain't it.

WB, querstion for ya. IF my main battery was to go dead on me from running my FF on it, would a pair of jumper cables attached form it to my 2 TM batteries be enough to get it cranked?

2 more buckets and 50 foot of rope. LOL Thanks. I have the 08 Nav chip and already got the Add A Seats. I am gonna get another ducer though one day this summer and hook it on a down pole at the front so I can use my down imager there when I'm jigging

You can jig fish at 3 to 5 mph?

DD....I think fish finders draw very little current...its in the milliamps....I doubt they would ever pull your main battery down. But yeh...I carry jumper cables in my boat....only used them one time in twenty something years but jumping off the trolling battery will work. If you have two trolling batteries....make sure you are jumping with 12 volts and not 24.

Seems I remember your TM is 24V. If so, to jump your cranking battery, just attach the leads to (1) ONE of the TM batts, positive and negative and the other end to the cranking batt.

But on a side note, you ain't gonna run that cranker down with your FF and aerators. If you do, you've got a suspect Cranking batt to start with. I used to worry about that junk too, but then on an experiment, before I got my livewell timer, I turned all 4 FF installed at the time on and let the aerator run continuous. Fished for 6 hours like that and the cranker still started the 4 stroke like nothing was different. Now, I only had a Group 24 Cranker at the time. 'Course, I have a 4 stroke which tends to crank easier and I can do an emergency pull rope start too....but still, with 2 FF's going and your itty bitty baitwell tank, you're not gonna touch the juice in that Cranker....unless it's bad to start with.

So sayeth Wannabe.

Wannabe...

Slow the chart speed way down and you will get great images with The DI feature on the front.

Just making sure cause I know my luck. My luck is I'd actually have 7 fesh that were all over 3 pounds at the Fj and when I'd try and crank the boat to head to weigh in, it wouldn't turn over. LOL

I DO have an aerator in the boat but I have a Mr Bubbles form my insulated Minner bucket and just use it.