trolling motor direction of rotation

I have a Minn. 65at, May have the motor rotation reversed. When I look at the prop it turns clockwise. Is that correct and wires are hooked properly, what is the other method of causing this. Is it the main housing being rotated one half turn or needs to be turned end for end?

Looking at the prop from view below it should turn counter clockwise. If it isn't the most common problem is:

A.

Wired backwards

B.

Brush plate in upside down

C.

Magnet shell upside down (on 3 ¼” or 3 5/8” motor assemblies the marking notch should be on the

bottom towards the skeg)

thanks IBNFISHIN