-
tohasu trouble
Tohatsu 2004 90hp 2 stroke
Ok I traded my boat last week for a pontoon with a 90hp tohatsu on it.
The motor was started on muffs ran fine. trade was made.
When I got home I hooked it back up to water started it then I put it into gear It does go into gear (forward & reverse) prop spins.
It had a very bad rumbling noise. Did not seem normal.
I pulled the lower gear dran to check if there was metal in the oil.
Water started pooring out! it had about1/4 water 3/4 oil. I can not see any cracks in the lower end and new oil is not leaking out? dont know how the water got in there. but no metal.
When I ran it agin after refilling the noise was still there. I think this thing may have a bad lower unit.
Where can I get a replacment or can I get mine rebuilt? :
This sucks I should have had the guy put it in gear before we did the trade
Im located in stockbridge any help would be great.
-
-
you will probabley git a little rattle with no pressure on it . check the prop for looseness .i have a 40 hp tohatsue on my pontoon i ran it on a muff when i bought it . i don`t remember if it did have a rattle to it .there is a dealer between cordeal and the lake on hwy 280 on the left. ragfly can tell you the name of the dealer in cordeal .there is a forum on tohatsue motors will find it and post the link.also the tohatsue website . they are the same as nissan.
http://forums.iboats.com/forumdisplay.php?f=29
http://www.onlineoutboards.com/Help....san-vs-Tohatsu
-
the name of the dealer in cordele is Harris Marine.
-
tohatsue dealer is Evans Outdoors. name is Dug Evans . Harris in down the road from hem on the left .he deals with large inbord boats mostley.