I GOT A BAD CASE OF FEVER
Quote:
Originally Posted by
Rees Guide
I would demand a test ride in whatever I bought if buying new, I would be the driver and the day would be tough, they all perform well in slick water. I realize that is not done much anymore but if I were buying new I den sure wouldn't do it without a test ride.
That is EXACTLY what my demo boats are for. Let's go when it's ROUGH!!! "Proof of the pudding is in the making". I took my Xpress demo to the corp in Grenada for a comparison ride with other brands invited. It was Rolling. Nobody else even had the courtesy to show up. They bought a boat from me. Still wading through the red tape, but just about got her done tho.
I GOT A BAD CASE OF FEVER
Quote:
Originally Posted by
mervin
I've owned an Excel 2172CC for over 2 years now and have regretted it ever since.
There is NO dry storage on it anywhere, the fishbox/live well under the drivers leaning platform is sorely inconvenient to access, the hull cracks, and it is an extremely rough ride on anything other than flat water.
The Excel center console doesn't turn, it slides and slew through corners due to it only having the one (and only one) chine down the center of the boat.
Steer clear of this boat! A Sea Arc would be a MUCH better choice, even if it is a little higher priced.
I had to take mine to a welder because the joints that come together at the nose, broke, due to vibrations from the beating due to rough water.
GO TO A SEA ARK!
Sent from my SM-G900V using Tapatalk
That model is a mod-V boat. They all ride like that. Some of the SeaArk boats as well as several others are built on a dead rise hull like the V-Cat, the Blackhawk, etc. Those models do much better in rough water than the straight mod-V boats. The true pad hull is a dead rise hull with the pad for lift. It's like the boat is riding on a wakeboard. The smoothness of the ride and the high performance of these hulls CANT BE BEAT for a comfortable ride in ROUGH WATER!!! That's why ALL glass bass boats are built with a pad ride hull. With No runners from front to back to turn with, the pad boats turn on the hooks on the side of the step pad and have an 18 degree bow rake to slice through the waves instead of POUND through them.
Let me take you for a ride BEFORE you make up your mind. [emoji4]
In the Excel center console boat, you should have picked the 203 or 220 Bay Pro pad hulls for big open water. The Xpress H20 through H24 Bay boats all have pad hulls also, as do many of their Bass and Crappie models.
I GOT A BAD CASE OF FEVER
Quote:
Originally Posted by
mervin
Why didn't you tell me this 2 1/2 years ago?!!!
Sent from my SM-G900V using Tapatalk
If you ask, I did. If you ask for a certain model, I assumed you did your own research. I always tell my customers the difference, but most of them don't understand what I'm saying. The cost difference is usually the deciding factor for most. The pad hulls usually cost a bit more because it cost more to manufacture those hulls.
I've been preaching about pad hulls every since I've been on C.C. It's just hard to educate some people on the phone or online. Lots of guys assume I tell them this just because I sell pad boats, but that's far from the truth. Most just think a salesman will say anything to sell you something and I guess some do that. I just tell you about the difference. You can buy a pad boat from lots of dealers. I'm just trying to educate the guys that Don't Know. If I sell you a better boat for that that's good. If You buy your boat from another dealer or you choose another brand, at least you know the difference and that's also good. I don't get mad at you. [emoji4]
