Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: One more shot

  1. #1
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default One more shot


    Took an hour to get the dang shower valve out but we got it.
    Now to find some parts
    Name:  uploadfromtaptalk1390671368716.jpg
Views: 367
Size:  23.3 KBName:  uploadfromtaptalk1390671385835.jpg
Views: 385
Size:  29.9 KB

  2. #2
    Join Date
    May 2006
    Location
    Horn Lake, MS
    Posts
    9,566
    Post Thanks / Like

    Default

    Southaven Supply, Brown's or Hulbert's.
    Don't try to rebuild parts, just buy new.

  3. #3
    Billbob's Avatar
    Billbob is offline Crappie.com Legend - 2013 Guber Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    md. st. in.
    Posts
    16,482
    Post Thanks / Like

    Default

    yep
    PROUD MEMBER OF TEAM GEEZER

    Crappie.com Pro Staff
    Guber Pro Staff
    Cane Pole Pro Staff
    Haulin Ash Pro Staff

  4. #4
    Join Date
    Dec 2009
    Location
    illinois
    Posts
    9,914
    Post Thanks / Like

    Default

    Looks like a toilet seat to me. Is that your shower?



    MEMBER CRAPPIE MAFIA
    Likes Billbob LIKED above post

  5. #5
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,343
    Post Thanks / Like

    Default

    I got faith in you buddy just don't let Melissa road test it first.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979




  6. #6
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default

    No rebuilding needed but the seats I'll have to find at one of those places. They are 5/8 x 20t but not like anything made today. Cleaned out all the chewed up seals that were packed in the diverter and put it back together until I can get seats.

  7. #7
    Join Date
    May 2006
    Location
    Horn Lake, MS
    Posts
    9,566
    Post Thanks / Like

    Default

    Southaven supply would be better. They can tell you what brand it is too.

    Mine had Citation on the handles, they told me they were made by another company, marketed by Citation.

  8. #8
    Join Date
    Oct 2008
    Location
    Brandon, Mississippi
    Posts
    27,484
    Post Thanks / Like

    Default

    Try Ace hardware They have alot of older parts
    proud member of "Team Cup"

  9. #9
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default

    Southaven Supply will be the only place if any that will have the seats I need. I've looked at every book and online place there is just to find one that exactly the same and there aren't any. This stuff is so old it was probably a one off anyway and probably hasn't been made in decades. Good thing is once I got the diverter cleared of old chewed up seals from the other valves I can fill the tub up in less than 5 minutes--probably close to 3 minutes. It hasn't run this good since we bought the house. Told the wife I will just keep seals on hand until I can get the proper seats--and told her not to tighten down the hot and cold too much which will help the seals last a little longer.

  10. #10
    Join Date
    May 2006
    Location
    Horn Lake, MS
    Posts
    9,566
    Post Thanks / Like

    Default

    My other house was built in '69 and sat vacant until I bought it in '73, so I have some old fixtures too. With the 5 of us in the house the seals wouldn't last over 6 months. Seats, a year, diverter about 1 1/2 years. The last trip to Southaven supply I bought a good size bag of handles, stems, diverters, seats and seals. My daughter lives in the house now. The son-in-law wants to replace the fixture, I told him no.
    DD, this hardware store is about 15 miles from KDAVID1's house. The staff pretty well know how to help, not like HD and L's. Hardly every find that they don't have what you need. The nearest Ace is out past Mr. Jim's house. A 40 to 50 mile trip for KDAVID1. When I lived in Nashville, Ace was the first place I would go for hardware, mostly having everything I needed. I've been to this one here a few times and haven't found what I'm looking for. If I go to Ace online site, look up an item and locator I find it at the Nashville store but not either of the Memphis stores.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP