any plumbers here? Need advice.

I agree with doing it once and doing it right. Just replace the tee or use the inside fitting mentioned.:twocents

I have fixed these numerous times like ATM said then I got one of these, it makes jobs like this a breeze, just cut two small slits thru the broken off piece of pipe then take a screwdriver and peck the old out, with some sanding you can glue a new one rite back in there. Borhttp://ecx.images-amazon.com/images/...zL._AA160_.jpgrow or buy you one of these and keep it, best tool ever invented in my book.

Quote:

---

Originally Posted by jimmydee1

This comes in three parts. 1) getchur self some duct tape, balin wire and WD-40. U can fix anything with just that. 2) getchur self a six pack of your fav. adult bev. and go to work. 3) Call the plumber and let him fix ur screw up then fix the problem right.

Works for me everytime.

---

make sure its a union plumber might as well go first class

Attachment 136775
Attachment 136776
Cut n chip and clean up with a rotary file. Fits good. Thx for all the opinions.

[QUOTE=Tracker123;2439096]You can make a coupling back to the original size PVC pipe used with this:

https://encrypted-tbn3.gstatic.com/i...UVrJAtYhHwcy_G

I knew you could do it if enough ideas came along. The plumber son-in-law said to use the fitting shown above. It's sold at Brown's, Southaven Supply and Chris Moore. Not at Home Depot or Lowe's.

That was my original idea was to splice it. Thx for bugging your son in law. And I agree, Southaven supply is the place to go for advice and out of the ordinary hardware. Thx jt.

Quote:

---

Originally Posted by ATM

I've done it this way several times. Take a hacksaw blade out of the holder and use the blade if you don't have a sawzall. I always make my cuts about a 1/4' apart. Chisel out the 1/4' piece first. This makes room to get the remainder out easily.

---

what he said......... I actually use a dremel tool !! did it today on a toilet flange and do it quite regularly , gdg I bought me one of those yesterday to cut out hardwood floor. filling in where floor vents were taken out and cutting back to the break/splice ------------Cat's Meow ,,,Cadilac,,, Best of the Best I see hundreds of use's

[QUOTE=canebreaker;2439222]

Quote:

---

Originally Posted by Tracker123

You can make a coupling back to the original size PVC pipe used with this:

https://encrypted-tbn3.gstatic.com/i...UVrJAtYhHwcy_G

I knew you could do it if enough ideas came along. The plumber son-in-law said to use the fitting shown above. It's sold at Brown's, Southaven Supply and Chris Moore. Not at Home Depot or Lowe's.

---

:ThumbsUp

Quote:

---

Originally Posted by ATM

I've done it this way several times. Take a hacksaw blade out of the holder and use the blade if you don't have a sawzall. I always make my cuts about a 1/4' apart. Chisel out the 1/4' piece first. This makes room to get the remainder out easily.

---

:hesaid

Quote:

---

Originally Posted by mississippi

That was my original idea was to splice it. Thx for bugging your son in law. And I agree, Southaven supply is the place to go for advice and out of the ordinary hardware. Thx jt.

---

They are living in my house rent free, well dinner. I bug the crap out of him all I can. Go through the truck for free stuff too.