Tell me they are not still not duct taped to the side of yo boat
Printable View
Tell me they are not still not duct taped to the side of yo boat
No duct tape. Some screwed in clamps. I did lectric tape the wires together in a couple spots though. When I rewired the TM and the batteries I used wire connectors, then coated with dielectric grease n lots of liquid lectric tape to seal them
I have to rip out 80% of the wiring on my glass boat for the rebuild. Not gonna be fun, but I need to change out the impellor pretty bad, she was gettin weak when I parked her. Glad ya got her fixed up Don.
MO, It's real easy. Few bolts on the motor, then drop the lower unit and about 4 bolts there
Have you checked and made sure it goes into gear ok ? forward & reverse with the motor running ? I know on some older smaller motors it was easy to get to the water pump and put it all back together but if the shifter linkage slipped out it was a Booger to get that back in !!! So make sure you check that before you head to the lake.
Yeh, it went into gear