Ok this is probably a dumb questions but I have had a complete

**canebreaker** · 06-21-2012, 06:41 PM

Push one side of the net onto the loop. Pull the other side down. Take one or two of the net loops off of the loop. Then repeat going the other way. Back and forth a few times until you can pull all the net off at once.

Remember how many loops on each side of the net you removed this way. Cause that will be your starting point on the new net.

**jigflinger** · 06-21-2012, 06:53 PM

Larry, push the hoop wires together and push the net down both sides so the net is all on one side, then slide it off either side.

**maachuu** · 06-21-2012, 07:01 PM

Thanks all, got it, had to work it around slowly but it did come off, now ifn I had my other net to go back on I would be in bizness

**jigflinger** · 06-21-2012, 07:09 PM

Since the rubber net is round bottomed, you don't have to worry about spacing. You can't put in on wrong.

**4THETHUMP** · 06-21-2012, 07:51 PM

Don't say that .

Thread: Ok this is probably a dumb questions but I have had a complete

Thread Tools

Display

Posting Permissions