Missouri Trader Thread

[Wilk816]

I only have 3 it turns out, 1 went on a dipping rod I forgot about.

[TheRo0sTer]

Millennium Marine SpyderLok Rod Transport Rack - I have the bases sitting in my boat. They've been sitting for 2 years!
$100 obo

[Wilk816]

Boat:: 1988 Lowe 1648 Jon
Trailer: 1988 Skipper (Says Skip on title, just guessing here)
Motor: NEW in 2023 - DuroMax XP18HPE 440cc Recoil/Electric Start (Has battery on board for electric start)
Longtail Kit: NEW in 2023 - Beaver Dam Mud Runners

I bought this used from a guy in STL, MO. I've gone through this boat and basically redone everything there is to do. It was in bad shape when I got it, trailer and transom wise, but the hull was great so no problem. I like working on things. I've mostly set it up for duck hunting, but you could fish out of it also.

Things I've done:

Boat:
New transom - Fiberglass resin coated plywood. Should last a very long time.
Super Slick Bottom Coating - For shallow water use, supposed to make it glide better, I think it does. Also another layer of sealant for the bottom.
Front Light bar
Collapsable rounded handle. Can be completely removed and put back with the mounting brackets.
Removed tops of seats to add lockable storage lids. Lots of room to haul stuff.
Added battery up front with kill switch and easy extension cord hook up for charging.
Front and rear nav lights
3 bank switch for nav lights & front spot light. 1 open for another accessory.
New in box cover (cheapy but new)
New paint job

Trailer:
New axel with built in grease zerks
New wheels/tires
New bunks and carpet
New waterproof taillights with new wiring
New Trailer Jack
New Winch
New Break away chains
New paint job

It's ready to go. I've hauled it to Nebraska twice in 2023 & several Missouri CA's. I'd take it anywhere.

$3500

[Wilk816]

Selling my boat so lots of gear for sale. Boat will be for sale in a week or two.

6x 12ft Jenko Spider Troll Spider Rigging Rods w/spinning reels - $300
2x Millenium Marine B100 Seats w/rotating Pedestal - $300 (bases are $65 each)
2x Millenium Marine Spyderlok R100 Rod Holders w/ 4 bases - $400
6x Okuma Convector Line Counter Reels - $350 ($86 each new)

If you like pulling cranks the Okuma reels are amazing. I only used them twice but really loved them. Wouldn’t sell if I wasn’t selling my boat.

[Wilk816]

Selling my boat so lots of gear for sale. Boat will be for sale in a week or two.

6x 12ft Jenko Spider Troll Spider Rigging Rods w/spinning reels - $300

2x Millenium Marine B100 Seats w/rotating Pedestal - $300 (bases are $65 each)

2x Millenium Marine Spyderlok R100 Rod Holders w/ 4 bases - $400

6x Okuma Convector Line Counter Reels - $350 ($86 each new)

If you like pulling cranks the Okuma reels are amazing. I only used them twice but really loved them. Wouldn’t sell if I wasn’t selling my boat.

[Wilk816]

4 Okuma reels remain - $240 for all

[Wilk816]

2021 Nitro Z-18 - 1 Owner Always Stored Inside
Mercury 4 Stroke 150 HP Motor - 27 Hours On Motor
2021 Trailstar Tandem Trailer - Pulls like a dream

Boat:
Console = Humminbird Solix 10 w/ Side Imaging/Down Imaging
Bow = Garmin 126SV Touch Screen w/ LiveScope
MinnKota 80# Ultrex w/ I-Pilot & Remote - My favorite trolling motor I've ever had, cable steer or remote/electric
BassBoatTech Console Mount
Beatdown Outdoors Bridge Mount
Beatdown Outdoors "The Ultimate" Mount For LiveScope Graph
Manual Jack Plate
Mercury Vessel View Module - Pairs Phone To Motor For Hours/Maintenance/Etc
Nitro Custom Cover
Drawbar, Tongue Pin, Graph Knobs, Trolling Motor Lock all keyed the same
Driver Side Cleat

$36000
Can send pics on request, they wont upload for some reason.

[Wilk816]

Reels and rod holders are sold. Thanks.

[Wilk816]

Boat sold. Only thing left are six 12ft Jenko rods w/ reels.

[Baitwaster]

My winter project! Needless to say, I have not been fishing . I'm asking $9300
I flipped this for fun and to make a buck. Please read everything, I wont answer canned messages. Cash only, well my daughter is turning 16 this year so a quality trade might be done for Toyota or Honda. I'm in no rush.This is a fully restored Classic, Tracker Pro V-17 with a 75hp 4 stroke Merc that starts and runs good. boat and motor are 2000 and original to each other, trailer is an 86. WYSIWYG. The previous owner went the way of an old fisherman and the family left the boat parked under a tree. I don't know if the motor can even say how many hours are on it. Almost everything but the metal and motor are new. 3 clean titles in my name. I don't remember what the compression tested at but all the cylinders were very similar (Seems like 125 or more. High enough I wasn't worried but I don't know what is appropriate)(I started this in October).New Motor parts: Spark plugs, fuel filter, fuel line, Oil, Oil filter, Impeller, lower unit oil, and graphicsNew Boat Parts: Transom, Transducer block, battery, decking, carpet, seats, fuel sending unit and gauge, bilge & livewell pumps (since they are hard to get to), fuel/water separator, horn & fire ext (To make it legal), custom wrap and graphics, and A Lot of miscellaneous parts.New trailer parts: tires and wheels, wheel bearings/races, jack, winch and strap, bunks.Why you should buy from me: I do work as if it is mine to keep forever, Reduced sales tax, much lower personal prop tax, you get a very close to "new" boat at a fraction of the price, If I get close to asking price I can advise on electronics (I'm close to an expert regarding graphs and trolling motors) and I can install them if you pay for the supplies.Please note: I still need to test EVERYTHING when the lake thaws to be sure I have all the pumps wired correctly, I also wired the safety kill and neutral safety switch back in so those definitely need tested, and the throttle cables need checked.