Reply With QuoteI bought these 3 yrs ago and are working fine, will never rot. Ideal for Boat Lifts !
Likes: 0
Thanks: 0
HaHa: 0
Slabmaster II
Composite 2x4' Bunkboards
Has anybody tried using the composite wood for bunk boards? If so , hows it holding up?
Crappie.com Legend
I bought these 3 yrs ago and are working fine, will never rot. Ideal for Boat Lifts !
MEMBER CRAPPIE MAFIA
Crappie.com 2K Star General
Wilbur, will your boat start to slide off on a steep ramp if you dont hook strap first, or can you unhook and back down ramp with no worries?Originally Posted by wilbur
Crappie.com 2K Star General
According to the website yes it will. States to never unhook boat till in water
There will be days when the fishing is better than one's most optimistic forecast, others when it is far worse. Either is a gain over just staying home.
Slabmaster II
I used composite 1 x 4 on top of my bunk boards and they are slick . Been on for 3 years with no problems . Under $20 at Home Depot . Definitely don't unhook your boat on the ramp or attempt to go up the ramp without a strap.
I counter sunk the screws about 1/4 to 3/8 to keep the screws below the wear surface .
Crappie.com 2K Star General
if i guy just put on the composite on say the front half of the bunk boards do you think the boat would set on there if you unhooked it or while you where loading it and not slide off? I would make that last 3 feet easier to get the boat on and up to the wench.
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
I wouldn't take a chance on it. It might not slide all the way off but I wouldn't want to take that chance with my boat.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com 2K Star General
my worry is hooking it up on a steep ramp becasue it would keep sliding back.
Crappie.com Legend
The ones I have arent that slick, I never unhook at the top, I always wait till the waters edge. When you take strap off it doesnt move till its floating. These have a textured side to them.
MEMBER CRAPPIE MAFIA
Trophy King
If your bunk boards are 2x4's with the wide side down, one inexpensive solution is to get a couple of plastic 4x4 deck post covers, rip them lengthwise and screw them on the boards with the screws in the side of the bunks. They work really well and let the boat slide easily. The other (more expensive) alternative is to buy "Glyde Stiks" (google them). I've got two trailers with each of these setups & both work well. (DON'T UNHOOK 'TIL YOU'RE READY TO LAUNCH!!!).
Posting Permissions
