Best have them welded to the trailer frame !! Otherwise ... someday you may come back to "no steps" :mad:
Printable View
Best have them welded to the trailer frame !! Otherwise ... someday you may come back to "no steps" :mad:
Attachment 458761Danny, these were made using one spare tire carrier for the riser step. I added a 1" GRC pipe for the grab pole. Less than a hundred bucks for complete setup. It will still allow for tongue fold back.
rufishn are these pretty safe climbing up and down from launching and trailering. I ordered a spare tire rack and a step from Amazon, I may need to order another step, have not recieved them yet.Quote:
Originally Posted by rufishn
Yes they are very safe. I weight around 210 and jumped up and down on them and cant move them. The safety aspect in my opinion is the grab pole, as I use it going on and grab hold of it getting off.
Can you show me a close up of how the pole is put on at the trailer
I really need to do something like this!
Sent from my iPhone using Crappie.com
Sorry Danny for late response, sorry you got to at pic sideways ???. Don't get to check very often. I drilled the top and bottom of the back plate of the tire carrier and used 1/2" bolts, keep in mind the pole is galvanized rigid conduit.
Attachment 459625
Quote:
Originally Posted by rufishn
thanks for response rufishn looks like I can mount a pole also like this. Thank you sir.