pulling crank question

What type of Crank's are you using to get down to depth's from 10 to 14 ft,

Quote:

---

Originally Posted by Bronzbackhunter

What type of Crank's are you using to get down to depth's from 10 to 14 ft,

---

Bandit 200s with 80-100 feet of line out Bandit 300s with less line out.

Yes, the bandit 200 and 300 with lots of line out will do. I also still like to use the deep wee R
Rebel lures. You can also take any deep running lure, take of the back treble hooks, and tie
a line about 18" long into the back eye, then tie a small hairy jig to the line and hold on. I like
the white and chartruse hairy jig when the cranks are not doing the job. Caught many fish using
this method.

Thank's for the info.

Quote:

---

Originally Posted by Bronzbackhunter

What type of Crank's are you using to get down to depth's from 10 to 14 ft,

---

a bandit 200 using 10 lb. mono and pulling at 1.8 mpg will run 14 ft. deep with a 150 ft. of line out. a bandit 300 will run 14 ft. with 76 ft. of line out. 10 ft. with a 200.....57 ft. of line out.....10 ft. with a 300 you need 36 ft. of line out. This is by the Precision Angling chart.

Where can i find the Precision Angling chart. I have never herd of it befor.

Don' know if its still active but I got it from PrecisionAngling.com

Bandit info

Thanks Handi

Thanks for this Bandit info. I am just starting out trolling crankbaits and that is invaluable info for me.