If seat is still open come sunday, just tell me when to be there and what to bring.
Printable View
If seat is still open come sunday, just tell me when to be there and what to bring.
It's a done dealQuote:
Originally Posted by Lowbidr
Sunrise weather permitting
Bring what you need to eat or drink you've seen my rig not room for much else [emoji571]
10-4 thanks
Now you done gone & did it......I gotta get some of those cranks & try them in Henderson.....
The fish knew all my old crankbaits on a first name basis had to mix it up on them
Grizzly Jig has the best price on them.....24 colors now and a lot more coming. Attachment 212450Quote:
Originally Posted by prefers shiners
I ordered mine last Tuesday got them Friday that's service [emoji106]
How are you maintaining the correct speed? I run my trolling motor on the lowest setting and it's going too fast. I was thinking of putting a coupe of 5 gallon buckets behind the boat to see if this slows me down.
That will work....drill a half a dozen 3/4 inch holes around bottom of bucket....you can hang one on each side off of your rear cleats. I use a Minn Kota Terrova with I-Pilot and can set speed just right. But yeh the buckets work....I used them in the early days of this addiction when I started pulling cranks 7 years ago.Quote:
Originally Posted by Barneyrb
Y'all must have some bodacious trolling motors. MY 12V I-Pilot on lowest setting is about .1 MPH. Tight lining at .5 MPH is usually around 2.5 to 3 on the Pilot. Don't y"all pull cranks at 1.5 MPH or more? That is about 70% of max on mine, I can get up to about 3 or 4 MPH if the wind is not blowing.