Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 5 of 5

Thread: Heading to new strip pit - need guidance

  1. #1
    Join Date
    Apr 2011
    Location
    Olathe, Ks
    Posts
    90
    Post Thanks / Like

    Default Heading to new strip pit - need guidance


    Heading to a strip pitt in Missouri near Appleton. The pit is shaped like a T. The main channel is 9'. The top left of T is 5'. The right of T is 24'. Any ideas where to start? I'm showing up tomorrow night with some lights. Will try jigs and will have minners for back up. I'm thinking about at the top of that T where there is 3 different depths close to each other. I'm considering taking my vexilar to get it warmed up for this winter.

  2. #2
    Join Date
    Apr 2004
    Location
    Lawrence, Kansas
    Posts
    3,564
    Post Thanks / Like

    Default

    The only advise I can share is, your best bites, under lights, is on the outer edges of the light. Depth may not be a factor. <*)}}}><
    You'll see the difference,,,on the end of your line! PROUD MEMBER OF ​TEAM GEEZER

  3. #3
    Join Date
    Apr 2011
    Location
    Olathe, Ks
    Posts
    90
    Post Thanks / Like

    Default

    Good to know. Thanks Chatt

  4. #4
    Join Date
    Nov 2009
    Location
    Wichita, Kansas
    Posts
    460
    Post Thanks / Like

    Default

    Only fished a handful of strip pits a couple years back around Big Brutus. Did find crappie in several of the pits. Never found a "brushpile", but best bet was to fish the top part of trees that had fallen in the water. One pit you could see down 5-6ft, you would put a minnow down as deep as you could and still see it, and you could watch the crappie come out of the tree and take your minnow. Pretty cool. Also found some on a sort underwater ledge that we stumble upon in 10-15ft, that held some fish. I know these pits are a couple hundred miles apart, but hope it helps.
    Tim.

  5. #5
    Join Date
    Jan 2012
    Location
    Kansas
    Posts
    33
    Post Thanks / Like

    Default

    I fish one that is very similar near Clinton, MO. In fact, it's setup almost exactly the same, t-shaped and deeper on the right side. We slow troll jigs in the deeper arm and usually slay 'em, even in the middle of summer. We'll double-rig jigs, put out about 30 yds of line and go medium speed on the trolling motor. The key is finding submerged brush or other cover. When you troll over some cover, you'll usually hook up on multiple rods at the same time. You can then go back to that spot if you don't have a fishfinder and locate the brush and clean 'em out.

    We've also had good luck at the junction in the "T", especially for the green fish. Fishing that area can be really productive especially if you can locate a ledge or some other break in that area. Good Luck!
    "A system of capitalism presumes sound money, not fiat money manipulated by a central bank. Capitalism cherishes voluntary contracts and interest rates that are determined by savings, not credit creation by a central bank." Ron Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP