Bought a fluid bed from TJ's Tackle and it works nicely except with the colors black and white. I have new Pro-Tec paint but these colors seem to be considerably heavier than the others I use. Can't get the "boiling" effect with these colors. Also after using these colors, when curing the jigs in oven as Pro-Tec recommends at 350 for 20 min. I am getting some excess paint running which is creating a few "cone head" jigs. Need a way to stand these jigs up when curing so the excess runs down the hook and not to tip of head. This is not happening with all jigs in these colors but when I get a run it will most likely be with these colors. My theory is that not being able to achieve the boiling effect in the fluid bed the color is going on thicker and then on some creating a run upon curing due to the thick coat of paint. Are others having this problem and what have you done to overcome it? Thanks