Jacobsen mold problems

I use a mold release spray. It's for making your own bullets. Works great,I sprayed them really good the first time and now and then as touch up.

Sent from my SM-G965U using Tapatalk

Hey Barry,
You have been given all kinds of good ideas from the CDC crew .I realize you have opened -up your gares for a resolve.That is water under the bridge so to speak.The first suggestion from all should have been to go to Jacob's website and read their casting instructions. Do-it provides instructions with every mold but I do not know if that is the case with Jacob's.Hopefully they do as that is probably your very best source of mold usage information .Good Luck and enjoy your tackle-crafting.

Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app

Mis-spelling above... "opened your gates"

Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app

This is what I spray my molds with. It will coat the mold gray.Attachment 372064Attachment 372065Attachment 372066

Sent from my SM-G965U using Tapatalk

Quote:

---

Originally Posted by Cray

Search for a post by DrNip on this subject. One of the things he talked about was placing the pour spout completely in the pour hole on that mold. I started doing that on my do it molds and it made a big difference.

---

Yup. Also soot his molds too.