Anyone pooring mustad wide gap jig hooks?

[Dongotto]

Wanting some feedback on the mustad wide gap jig hooks.

[willsjwills]

I am pouring 1/8 and 3/16 oz. heads in a do-it mold using #1 and 1/0 hooks with some modification to the mold. Had to modify hook area around point of hook so mold would close properly. A Dremel tool did it nicely.

[Fatman]

X2 with wills - Another one of the guys here previously had to sand off the warming chamber in order for the hooks to fit in the mold - he didn't have to do anything to the eye socket

[Dongotto]

I used a couple this weekend for the first time and was very impressed with how deep the hook sets were. Thinking I will poor some to try.