Reply With QuoteHere a picture of what I am talking about it. Need to know the height of the jaw assembly.
Likes: 0
Thanks: 0
HaHa: 0
Crappie Wall Hanger II
Renzetti Traveller Owners
Need some help for a measurment. My friends tying jaw busted ( cheap vise ) and he does not have money for a new vise. While researching I found a Renzetti Cam Jaw Conversion kit.
Unfortunately I can not find dimensions anywhere. What I need to know is the measurement of the jaw mounting bracket. The hole tap size would be helpful also but not as important as the bracket. 1/2 inch or slightly smaller would work.
Garminarmin gpsmap 1040 xs networked with Garmin gpsmap 1242 xsv , Panoptix PS 30 and PS 31. Livescope LVS 32
Ice rig Echomap Ultra 106SV with LVS 12 and GT10-IF
Crappie Wall Hanger II
Picture might help
Here a picture of what I am talking about it. Need to know the height of the jaw assembly.
Garminarmin gpsmap 1040 xs networked with Garmin gpsmap 1242 xsv , Panoptix PS 30 and PS 31. Livescope LVS 32
Ice rig Echomap Ultra 106SV with LVS 12 and GT10-IF
Crappie.com 2K Star General
The overall length of the jaws is 2.0625 (2 1/16”) – end to the tip. Screw looks like an 8-32.
Crappie Wall Hanger II
Could you check the dimension the O-Ring is covering ? Hopefully it will be real close to 1/2".
Garminarmin gpsmap 1040 xs networked with Garmin gpsmap 1242 xsv , Panoptix PS 30 and PS 31. Livescope LVS 32
Ice rig Echomap Ultra 106SV with LVS 12 and GT10-IF
Crappie.com 3K Star General
My traveller is right at 3/8,definitely not 1/2 inch. Measurements were taken with a ruler made in China. :rolleyes::o
Last edited by JUNGLEJIMJIGS; 09-29-2009 at 09:56 PM.
Crappie.com 2K Star General
Ditto the 3/8"
JJJ- too funny
Posting Permissions
