Yeah sounds like too much paint and I gotta agree with Cad, get a thermometer that goes inside your oven and check the temp that way, not all ovens are the same.
Fatman
Printable View
Yeah sounds like too much paint and I gotta agree with Cad, get a thermometer that goes inside your oven and check the temp that way, not all ovens are the same.
Fatman
One thing I have found that helps a lot is to "Tap" the jig after you "Swish" it
in the powder .... "Tapping" it on the side of the container (Jar or Fluid Bed)
will help get rid of some of the excess powder.
The Temps & Time that Cad gave will work ..
my 2 cents worth
JSC
:)
:D Did the white for 20 minutes at 200 and it was right. Thanks folks.