Years ago I made a simple rack to hold jigs after I dipped em in vinyl paint
and hungthem to dry. I called it my dip n dry! It's a snap to make with scrap wood. Get some 1 x 2's. You'll need 5 pieces. Cut the two sides as high as you want the sides.
Then cut the two base legs long enough to balance the rack. Then cut a piece to overlap the sides. Then get threaded rod (to keep the jigs apart)
cut to size between the sides. Note, the rack can be as high or wide as you want it.
Drill a hole in each side for the threaded rod to pass through and secure with washer and nut on each side. You can put them and height from each other.
Mine are appx 5 inches apart. Then put the top piece on. I used nails to fasten all the wood. If you want more rods, put a cup hanger on each side,
front and back. You can have as many as the rack is high.
I also use it as a background for taking jig pics by putting a couple nails in the top and hanging light
colored board. Then I took a 1x2 with a 16 penny nail and a alligator clip to hang the jig on.
I had the pics in then deleted them thinking they would stay on here, ooops, I'll post them tomorrow.


Likes:
Thanks:
HaHa: 

























