997 transducer and puck

[CarpPoop]

Does anyone know the specific part# for the 997s transducer and Gps Antenna. I want to be able to use my 997 on my other boat but have to install the gps puck and transducer first. Dont need to buy a whole new 997. I can only use one boat at a time. I went to the humminbird web site and I cant seem to locate it. The transducer would be a transom mount.

[Joby @ Humminbird]

Here are the part number that you need:

Power Cable PC-10
Side Imaging Transducer XHS-9-HDSI-180-T
GPS Antenna AS GR50
Unit Mount GM-2
Puck Transducer XP 9 20
Y Cable AS SIDB-Y

[TAE73]

Transducer HUMMINBIRD XHS-9-HDSI-180T T/M TRANSDUCER

GPS Humminbird AS-GR16 16 Channel GPS Sensor

[CarpPoop]

Joby. Thanks for listing what I need. I was looking at that list and was wandering why you listed 2 transducers....a puck and a sideimaging one. The boat I have my set up on just has one sideimaging transducer. So Im confused a bit on this. Also, what does the Y cable do? Thank you. Also, will that unit mount (GM-2) hook onto a Ram Mount?

[Joby @ Humminbird]

The reason I did list two transducers is because we usually rigs boats with the two transducers. We usually mount the side imaging transducer right under the jack plate for idling around and usually mount the puck transducer in the hull for high speed readings. By using the Y cable your 2D reading will always come from the puck transducer that is mounted in the hull for high speed readings.

[CarpPoop]

OK...i get what you are saying now. Thanks. I dont have that 2nd ducer on my other boat but it only goes 18mph tops so thats why I never realized the need for a second one.