[ATTACH=CONFIG]509680[/AAttachment 509681Attachment 509682TTACH]
Printable View
[ATTACH=CONFIG]509680[/AAttachment 509681Attachment 509682TTACH]
Top is down view, middle would be perspective view ( I don’t have that mount), bottom is forward view. LVS 34 transducer.
Thanks, I believe mine in like the bottom picture
You can set it manually to forward or down view…https://youtu.be/ngIxAJUhNss?si=rgMguUDuaXbDV6T2
If all else fails you can (restore sonar defaults). https://youtu.be/oJsPkB5IM-I?si=B3imENrQ-Db4GfsC
That would be forward view, one click past center back, I usually run mine 2 clicks past center back it will show your lure higher in the water column sooner casting.Quote:
Originally Posted by Grumpa
FWIW if you pole tips backwards to much,the gyro in the transducer will automatically switch to down view if it’s on auto orientation in the sonar set up page.
Thanks guys, at least I have a starting point to try to get back from.
Thanks to everyone for your help and suggestions, I was able to get it back to forward view. It seems I did not ever have perspective view. Maybe I should just go back to a cane pole and fish off the bank. It would definitely be more relaxing ��
You have forward, down, and perspective view depending on the mount you use.
I guess I don't think I have the correct mount for the perspective mode as mine does not pivot
Yeah, you'd have to buy it seperate, then update the software on your unit. Perspective mode is best used in less than 10ft of water (max), so it's use is limited to those times when the fish are in relatively shallow waters.Quote:
Originally Posted by Grumpa