She might not mind working a third job if you want them for electronics.... :Rofl
Printable View
She might not mind working a third job if you want them for electronics.... :Rofl
SuperDaveQuote:
She might not mind working a third job if you want them for electronics....
The Amped 30 a/h battery is only about $180.
A little OT on the second job should cover it.
:biggrin
Roy
Have you noticed a difference on seeing the jig when running the GLS 10 at 13+ volts?
We have noticed a drop off of voltage (12.4 or less on AGM Batt.) later in the day seems to cause the jig profile to diminish somewhat and when switched over to the Amped battery, the jig profile is clear as day again.
Just curious if you have had any experience with voltage/ jig appearance.
Thanks
That's what I have, the Amped 30 Ah..... good little battery.Quote:
Originally Posted by MikeF
will be interested if you miss any fish with ML. My concern was always with a wider cone on the Mega. You may be able to see your jig easier but you might be 2 feet off your target fish due to wider cone if pitching out 20 feet. Time may tell if your jig goes unnoticed. Just a thought.
Let me know how that works out:biggrinQuote:
Originally Posted by SuperDave336
Went out today scouting for an upcoming tournament. Did allot of searching and not allot of catching, that's fishing. Didn't do allot of playing and adjusting with my units today. Keep using LS at one spot and then ML at the next stop. Overall I can track my bait better with LS than I can with ML, not always but more often. Sometimes with LS I can see my jig from the time my bait hits the water all the way back to the boat. Sometimes I can never see it, this seems to happen a little more often with ML. Performance wise they are closer than what I was expecting. Image on ML is really bright with very little clutter as compared to LS. Right now I would give LS the edge but not by allot. I'm sure that ML will only get better once HB releases some updates.
Also I really haven't noticed that my images on my LS improved any with higher voltage.
Thanks RoyQuote:
Also I really haven't noticed that my images on my LS improved any with higher voltage.
Santa showed up earlier than expected and I was fortunate to add this to the electric arsenal on my boat. Just wanted to say thanks to ROY for his honest and open review and that helped me pull the trigger.
Tightlines to y’all.
Krappie Krane
Attachment 412962
Krappie Krane
Congratulations, I think your really going to like it!
I'm liking mine more and more. Last trip out after a little tweaking I could track my 1/16 oz jig most of the time out to 35'.
I really like the image quality better than LS. Both are good but different IMO. Some might say I need to increase the gain on the LS. For me this just adds clutter with no additional detail added.
Attachment 412964
Attachment 412963