Reply With QuoteIf only connecting the US2 to 898 SI you need to set the "Connected Transducer" selection under the Sonar tab to "Dual Beam" to shut off the SI transmitters ...
Rickie
Likes: 0
Thanks: 0
HaHa: 0
Crappie.com 3K Star General
US2 compatibility with 898c SI
If I hook these two together will I mess something up.
Sent from my E6810 using Crappie.com Fishing mobile app
Crappie.com 2016 Man of the Year
* Member Sponsor
If only connecting the US2 to 898 SI you need to set the "Connected Transducer" selection under the Sonar tab to "Dual Beam" to shut off the SI transmitters ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie.com 3K Star General
Crappie.com 1K Star General
Youre fine. It will recognize the US2 transducer and shut off the DI/SI, if not you should select it in the settings.
Crappie.com 2016 Man of the Year
* Member Sponsor
Selecting "Dual Beam" in the Connected Transducer selection under the Sonar tab shuts of the imaging transmitters, removes all imaging views from the unit - and allows the unit to operate safely as 2d/GPS unit only ...Originally Posted by catchNgrease
Only ONIX and SOLIX auto-recognize a connected xducer with a dedicated transducer ID wire channel in the xducer cable ...
All HB core units must be physically "told" which xducer is connected ("Connected Transducer" selection) so that the unit will know which Sonar channels to transmit ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Trophy King
+1 Don't forget to change it back to the US2 setting if you Restore Defaults. You will be losing the benefit of side imaging when on that selection.
Crappie.com 3K Star General
