Reply With QuoteIf you have SS box, just use an Ethernet cable from the SS box to the 2nd unit. If no SS, use an Ethernet cable as well.
Likes: 0
Thanks: 0
HaHa: 0
Trophy King II
??? about linking lowrance hds units???
Wanting to get another Lowrance gen 1 for the front of the boat and was wondering if all I need to link the two units is an ethernet cable? Going to add an external antenna also and was wondering what antennas are compatable with the gen 1's.
Crappie.com Legend
If you have SS box, just use an Ethernet cable from the SS box to the 2nd unit. If no SS, use an Ethernet cable as well.
GO BIG ORANGE !
I meant to behave, but there were just way too many other options available at the time.
Crappie.com 2K Star General
As jimp said an Ethernet cable is what you need. Buy a Point 1, it's a antenna/heading sensor, it will work with a Gen 1 even with it's slower processor. The Point 1 will require a NMEA network.
Slabmaster
Link them via Ethernet so you can share waypoints. Point 1 adds great options to the system so link both locators and the point one
Trophy King II
Link units via Ethernet, unit to unit, or link each unit from SS1 for waypoint sharing?Originally Posted by nhartke
Slabmaster
If you have an LLS module connect each locator to it. You will still need a started kit for Nmea to add the point 1
