HB 998 second station ?

[the wonder]

Wanting to have a second mounting station for my 998 at the bow. (currently mounted at the console)
wanting to use my same transom mounted transducer, and gps puck.
Have located power cable, wire collector, & 2 1/4 ram ball.

Needing cables to split gps & transducer signals?

Any help would be greatly appreciated. Thanks.

[Humminbird_Greg]

To allow that transducer to be used at either station you will need the US3 Unit Switch.
For the GPS try using the AS-SysLink cable.

[the wonder]

Thanks Greg!

[wilbur]

Or mount GPS puck on the unit and get a Transducer ext. cable to run from console to bow.

[jimmyfreeland]

I checked into that also. If you don't mind having the long chord on the deck you can just get the extention cables for the transducer and puck if you need to and lengthen the power cable by splicing into a piece of wire. I contacted Humminbird and this is what they told me to do. I think they come with 20 foot cables so your cables could possibly be long enough, you'd just have to lengthen the power chord, Like I said.... if you don't mind having the extra chord on the deck. If you send Humminbird an e-mail through their site they will quickly get back to you and tell you what you need for what you want to do.