I Pilot Circuit Board?

[Good Stuff]

It seems that my terrova I Pilot board has gone bad.... does anyone know where the cheapest place to get a new one is?

[speck chaser]

Are you talking about the board in the head of the terrova or the main board down near the battert tester switch

[Good Stuff]

The one in the head.

[CarolinaJim]

I'd be interested in your old non working board. I assume since you are looking for best price it is no longer under warranty.

I'd call Brian at BBG Marine and see what he could do for you. There are times when he sells for less than MAP.

BBG Marine Electronics

[Good Stuff]

Just curious what you would do with the old board?
Thanks

[CarolinaJim]

Fix it if possible, if not scavenge components of it. Why do you think it is not working, is not working completely or is some function not working?

[Good Stuff]

When I start to use it the remote will come on then go off. After trying this several times it will slowly start to stay on longer where I can push one of the buttons but go off again. After a while I can get the motor to respond a little. Somtimes the remote shows the prop not spinning when it is and vise versa. It is as if it has to warm up to work and once it does it will work fine.
I called Minn Kota and described all this so they had me plug my foot control in and see if it worked okay and it did, so they are telling me My circuit board is bad.

[CarolinaJim]

Did you verify your input voltages to the unit?

I'd check voltage at the boat side of the plug and check voltage on the TM side of the plug.

[Good Stuff]

I checked it at the plug but not inside the motor. I will try this today.
Thanks!

[Good Stuff]

I've got the right voltage at the motor.