How to Remove a Minn Kota Power Drive V2 Trolling Motor

[hunter]

Would appreciate a step-by-step on removing a bow mounted Minn Kota Power Drive V2 trolling motor from a Tracker Targa boat. The motor is sold but all shops in my area are 2 to 3 weeks backlogged!!!

["G"]

Remove the plastic cover on each side ove the base.....then you will see and be able to get to the mounting bolts. Most are bolted on with nuts on the bottom side so you might have to remove a compartment liner or something to get access to the bottom side....it takes real long arms on my boat.

[hunter]

You were right on point, saw the nut/bolts as soon as the side pannels were removed.
I am big time mechanically challenged :-) and can't thank you enough for your guidance. Even I can do this job :-)

Remove the plastic cover on each side ove the base.....then you will see and be able to get to the mounting bolts. Most are bolted on with nuts on the bottom side so you might have to remove a compartment liner or something to get access to the bottom side....it takes real long arms on my boat.

["G"]

Glad you got it figured out.

[wilbur]

Remove the plastic cover on each side ove the base.....then you will see and be able to get to the mounting bolts. Most are bolted on with nuts on the bottom side so you might have to remove a compartment liner or something to get access to the bottom side....it takes real long arms on my boat.

I heard you had real short arms and deep pockets.

["G"]

I heard you had real short arms and deep pockets.

my pockets are full.....thats what makes my arms seem short, lol