HDS-5 Problem?

Quote:

---

Originally Posted by Good Stuff

This is not my bow unit. It is at my helm and the transducer is mounted at the stern. My trolling motor has nothing to do with it.

---

Then make sure nothing in back is wrap around the transducer in the back. ie. battery cables.

Quote:

---

Originally Posted by Jason Gilstrap LOWRANCE

Then make sure nothing in back is wrap around the transducer in the back. ie. battery cables.

---

that sounds like good ideal ,could be to close to other electrical power source.way to go jason

Good Stuff,Yes there is a new updated version of the original 4.0 software.From what Lowrance is telling me is that some unit's had problem's with the original 4.0 but some did not.The one I have downloaded now is 4.0.36.59

Quote:

---

Originally Posted by Jason Gilstrap LOWRANCE

Then make sure nothing in back is wrap around the transducer in the back. ie. battery cables.

---

I will check....but why would it have worked so good before the new software download? I didn't move my battery cables or transducer wires:confused:

Quote:

---

Originally Posted by striperking

Good Stuff,Yes there is a new updated version of the original 4.0 software.From what Lowrance is telling me is that some unit's had problem's with the original 4.0 but some did not.The one I have downloaded now is 4.0.36.59

---

How would I know which one I downloaded?

On your unit, you can go to the system tab, highlight about,then enter, should display your firmware revision number.

Thank you.

My unit says I have software # 4.0.36.56. So I assume I have the old software...right?

Quote:

---

Originally Posted by Good Stuff

My unit says I have software # 4.0.36.56. So I assume I have the old software...right?

---

if striperking numbers are correct and yours it sure looks that way