Doing 50-50 colors new way for some of you guys.

Quote:

---

Originally Posted by snake River

G they do have them locally at the feed store but they are little bit spindly not too bad but they didn't have an all metal one last time I looked they had glass which would probably work longer was high temper.

---

Nothing spindlely about the one I have.....if I can remember I will take a pic of it tomorrow

Quote:

---

Originally Posted by "G"

Nothing spindlely about the one I have.....if I can remember I will take a pic of it tomorrow

---

Okay.

Quote:

---

Originally Posted by snake River

We decided to do some 50-50 stuff with our new bait crappie bug we were using a small plastic syringe to do Of the cavities and putting it back together and shooting your second color. if you do use is not that be careful take your time and do not apply a lot of pressure to the plastic syringe and it will work out just fine but if you do apply to much pressure they will explode I only recommend this to experience guys in plastics there are many of us that do use this method some of us are very well known such is micro spoons is owhere I learned this method when I bought his Jilly jig molds.One thing I was surprised about was the chartreuse and pink is the color coming through made part of the body look yellow and then you have the chartreuse tail in the picture.Yes I could have done this with a dual injector but I decided to do this method to see if it would work out on this plastic bait which I will probably use in the future here it is a lot faster for me than the dual injector maybe.:biggrin

Attachment 179584Attachment 179585Attachment 179586

---

Bob, I got an old teaspoon with a wooden handle from the thrift store. I took a hammer and bent the sides so it forms a nice funnel. Dip the spoon into your Pyrex jar of hot plastic and then pour directly in the mold instead of using the syringe as you do. Much faster and neater for me. Then I do as you do to close the mold and shoot the second color.

Quote:

---

Originally Posted by shipahoy41

Bob, I got an old teaspoon with a wooden handle from the thrift store. I took a hammer and bent the sides so it forms a nice funnel. Dip the spoon into your Pyrex jar of hot plastic and then pour directly in the mold instead of using the syringe as you do. Much faster and neater for me. Then I do as you do to close the mold and shoot the second color.

---

we will have to give that a shot Mike because I have to throw this arranges away after about four times so I'll find an old spoon and beat the heck out of it.

Quote:

---

Originally Posted by snake River

we will have to give that a shot Mike because I have to throw this arranges away after about four times so I'll find an old spoon and beat the heck out of it.

---

This is what I was talking about Bob

Attachment 179676

thank you Mike for posting the spoons I definitely will give this a shot.