Printable View
Easy as pie! Make a divider plate out of any thing I use roof flashing or thin aluminium plate from hobby lobby but in a pinch tin foil works well. Make your cut outs for your mold pins and injector. Put the divider in shoot the mold and now you have two halfs of your bait remove one side for use later and the side in the mold you can use paint or dye I bet a big piece of gliiter like people make cloths out of would look cool and reinject the same or different color and there you have it
here is how I do the eggs that I use. Attachment 123143
Those are nice eggs. Well done!Quote:
Originally Posted by jigtwins
there you go ship you can start making eggs make a nest for them to see if they hatch then you'll have a baby baits:Rofl
Jigtwins, that is definitely what I am looking to do. Care to share how you do it? And how big are those eggs?
Those are awesome eggs! I've been thinking shoot the egg with a divider plate the in the middle get a lure eye sticker put it in the middle and reinject do all use these for trout?
these are 10 mm eggs with a 4 mm bead placed in th center. pretty easy to make. just poke a small hole thru the egg, and thread a bead on a wire. then feed the wire thru the hole you made and pop the bead into the center. pull the wire out and roll the egg to "seal" the bead in. just make sure you don't make the first hole too big or the bead will not stay in. I do these in 6mm eggs with 2 mm beads. I have some pics somewhere. ill look to see if I can find them and post for you guys.
Beads do make it a lot easier. I would think that putting the hook through the hole in the bead will make a longer lasting bait too.