Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 9 of 9

Thread: Christmas Trees

  1. #1
    Join Date
    May 2005
    Posts
    30
    Post Thanks / Like

    Default Christmas Trees


    Hey

    I have 20 christmas trees that I need to put out. What is the best way to do this? I was thinking standing up in a 5g bucket with concrete. Any ideas?

    Thanks

  2. #2
    Join Date
    Apr 2009
    Location
    Illinois
    Posts
    13
    Post Thanks / Like

    Default

    Are all the needles off the trees? Had better luck with trees we burned the needles off of.

    Bucket deep, Concrete block shallow.

  3. #3
    Join Date
    Mar 2008
    Posts
    392
    Post Thanks / Like

    Default

    Stand them up in an old tire and fill with concrete.

  4. #4
    Join Date
    Mar 2009
    Posts
    35
    Post Thanks / Like

    Default

    ChumNCrappie is right - either let the "green" fall off your trees or burn it off. Then I would take some clippers and cut a sprial into the tree, cutting off a bunch of limbs. Most christmas trees limbs are way too thick for crappie to get up into. You will have crappie hanging around the bottom or sides if you don't cut any limbs, but you'll have a lot more fish hanging onto the structure if you give them some room to get up into the tree (another reason why the PVC trees work so well).
    It takes a surprising amount of weight to sink the trees. Your idea of a 5 gallon bucket with concrete is probably good.

  5. #5
    Join Date
    Feb 2009
    Posts
    44
    Post Thanks / Like

    Default

    i sank some pallets the other day with christmas trees and man it takes alot of weight to get it to stay down.

  6. #6
    Join Date
    Mar 2009
    Posts
    35
    Post Thanks / Like

    Default

    You are right tocold - takes a surprising amount of weight even without the pallet. That is just one reason why so many of us have gone to PVC. Much easier to sink - my PVC trees sink on their own, but I do add a brick just to insure they don't move.

  7. #7
    Join Date
    Apr 2006
    Location
    Pontiac, Illinois
    Posts
    2,725
    Post Thanks / Like

    Default

    I have used this method with great success. Drill a 5/8 hole thru the lower trunk of the christmas trees. Thread the trees onto 12/3 electrical wire much like stringing popcorn for the xmas tree. Put concrete blocks after every third tree and on ends. Now lay the strand out in a straight line on a point going from about 8ft to 20ft. The trees seem to stand up and sway in the water. The crappies love 'em.

  8. #8
    Join Date
    Jul 2008
    Location
    Hot Springs, Arkansas
    Posts
    1,321
    Post Thanks / Like

    Default

    These are some good ideas. If you'll read the archives, you will find a WEALTH of information that will make you the 'brush-pile king.

    aj

  9. #9
    Join Date
    Dec 2007
    Location
    al
    Posts
    173
    Post Thanks / Like

    Default

    no need to burn trees ive put out hundreds never any problems can you imagine the mess in the boat thats crazy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP