Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 6 of 6

Thread: Steering guestion

  1. #1
    Join Date
    Feb 2012
    Location
    arkansas
    Posts
    1,499
    Post Thanks / Like

    Default Steering guestion


    My son has a seaark stick steer,when going at slow speed the boat turns easy when running fast it is hard to turn to the left but easy to turn to the right. What could be causing this? Thanks for any ideas.

  2. #2
    Join Date
    Jan 2012
    Location
    Arkansas
    Posts
    781
    Post Thanks / Like

    Default

    Not sure cause it's usually harder to turn at low speeds. Only thing I might try is that small round piece with the fin on it underneath where you would mount a hydro stabilizer....that thing controls which direction the boat steers. If when you let go of the direction lever it starts to pull one way or the other adjust that find, it's only one screw to loosen and move the fin then re-tighten, might be able to raise the motor high enough while on the water to adjust it even. Surely some of our boat guys like Big River could be of more help than me though....I sometimes think I know just enough to make me dangerous.

  3. #3
    Join Date
    Jan 2013
    Location
    Arkansas
    Posts
    10
    Post Thanks / Like

    Default

    The motor may be off center a little at the trasom, I had the same problem and with that adjustment and the fin mentoned above it works lots better. Good luck and good fishing

  4. #4
    Join Date
    Feb 2012
    Location
    arkansas
    Posts
    1,499
    Post Thanks / Like

    Default

    Boat does not pull while running so I didnt think it would be the fin tab, but dont really have any ideas.

  5. #5
    Join Date
    Jun 2012
    Location
    arkasas
    Posts
    251
    Post Thanks / Like

    Default

    have same problem with my 16f lowe it is propeller rotating and trim setting all boat have this problem to some degree

  6. #6
    Join Date
    Aug 2009
    Location
    arkansas
    Posts
    451
    Post Thanks / Like

    Default

    I also have a Seaark with SS. and 40HP. Motor has to be in proper trim for best steering to overcome prop torque. Slow or fast..... just trim up/down until balanced.
    I DO MY BEST PROOFREADING RIGHT AFTER I HIT THE "SUBMIT" BUTON

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP